CBM Calculator: Easily Calculate Your Shipment Volume

When shipping goods internationally, accurately calculating your cargo volume is crucial for determining freight costs. This CBM (Cubic Meter) Calculator helps you quickly find the total volume of your shipment, whether you’re shipping by air, sea or land. After calculating, keep reading to learn how CBM impacts freight pricing, container planning and compliance—so you can avoid costly surprises and ship smarter.

What Is CBM?

CBM stands for Cubic Meter, a standard unit of measurement used in international freight to determine how much space your shipment occupies. Freight carriers use CBM to calculate shipping costs, especially for Less than Container Load (LCL) and air freight shipments.

How to Calculate CBM

CBM is calculated using this formula:

CBM=Length(m)×Width(m)×Height(m)×Quantity

For example, if you are shipping five boxes, each measuring 1.2m x 0.8m x 0.5m, the CBM would be:

1.2m x 0.8m x 0.5m x 5 = 2.4 CBM

If you’re shipping different-sized boxes, use the formula for each different-sized box, and then add up the results to get the total volume.   

Why CBM Matters

• Freight Pricing: CBM helps determine shipping costs for ocean, air freight and road transport.
• Container Load Planning: Ensures efficient use of space in shipping containers.
• Weight vs. Volume Considerations: Some freight modes charge based on dimensional weight, rather than actual weight, and you will need the CBM to calculate this. For example, shipping a box of feathers would not cost the same as a box of weights, though they might take up the same amount of space. 

What Is the Difference Between CBM, Chargeable Weight and Volumetric Weight?

CBM measures the total volume of a shipment, but when it comes to freight costs, chargeable weight—which can be based on either actual weight or volumetric weight—determines how much you’ll pay.

Total Weight vs. Volumetric Weight

• Total weight is simply how much your cargo weighs in kilograms or pounds. You calculate it by multiplying the weight of a single package by the total number of packages in your shipment.
• Volumetric weight (also called dimensional weight) is a calculation that estimates how much space a shipment takes up relative to its weight. Lighter but bulkier shipments may be charged based on this value instead of actual weight.

Here’s a standard formula for calculating volumetric weight:

Volumetric Weight (kg) =

The 5000 cm³/kg divisor is known as the shipping factor, but this number may vary by carrier. Some freight providers use 6000 cm³/kg or other values, so always check with your carrier.

How Freight Carriers Apply Chargeable Weight

Most shipping companies compare total weight and volumetric weight, then charge based on whichever is higher. This is known as the Weight or Measurement (W/M) Rule.

For example:

• If you’re shipping dense, heavy goods, you’ll likely be charged based on total weight.
• If you’re shipping light but bulky cargo (like pillows or large plastic containers), you’ll be charged based on volumetric weight.

How Many CBMs Fit In a Shipping Container?

Below is the maximum capacity of typical shipping containers, but keep in mind that every inch of space cannot be filled—there will always be gaps. Estimate a little more than 10% of space for gaps upon loading. 

• 20-ft container: 33 CBM
• 40-ft container: 66 CBM
• 40-ft High Cube container: 72 CBM

Don’t Overlook Documentation & Compliance

Now you’re ready to book freight, but calculating CBM is just one step in getting your goods ready for export. It’s time to ensure your documentation, compliance and total landed costs are in order—because even the most efficient freight planning can be derailed by missing paperwork or unexpected fees.

At Shipping Solutions, we help U.S. exporters simplify the complex world of export documentation and compliance. Our software streamlines the process, reducing errors and saving time by allowing you to quickly generate commercial invoices, packing lists and other required shipping documents—all while ensuring compliance with U.S. export regulations.

• Automated Documentation: Create all the export documents you need in one place—without re-entering data multiple times.
• Compliance Checks Made Easy: Screen shipments against restricted party lists, properly classify your products, and check for import and export license requirements before you ship.
• AES Integration: File your Electronic Export Information (EEI) through the Automated Export System (AES) with just a few clicks, ensuring compliance with U.S. Census and Customs regulations.

Don’t Forget Landed Costs!

Understanding CBM helps you estimate freight costs, but to truly calculate your total shipping expenses, you need to account for duties, taxes, tariffs and other import fees. Our Landed Cost Calculator makes it easy to determine the full cost of getting your goods to their final destination—so there are no surprises when your shipment arrives.

Let us show you how it works! 

Like what you read? Subscribe today to the International Trade Blog to get the latest news and tips for exporters and importers delivered to your inbox.