The International Trade Blog arrow Export Forms

CAFTA-DR: Determining the Rules of Origin

On: April 29, 2016    |    By: Sue Senger Sue Senger    |    6 min. read

CAFTA-DR: Determining the Rules of Origin | Shipping SolutionsThe Central America-Dominican Republic-United States Free Trade Agreement (CAFTA-DR) provides duty-free trade on most goods traded between the United States, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras and Nicaragua.

My first article in this series provides some background about the agreement. My last article discussed how to declare that a good is originating. This final article in the series addresses the rules of origin.

The Rules of Origin for the U.S.-Central American and Dominican Republic Free Trade Agreement (CAFTA-DR) were largely modeled upon the North American Free Trade Agreement (NAFTA) and the U.S.-Chile Free Trade Agreement. There are, however, some important differences that require the close attention of the U.S. exporter.

How to Read the CAFTA-DR Rules of Origin

Rules of origin are written in terms of the Harmonized System (HS) of Tariff Classification. The HS classification system uses six- to 10-digit codes to identify goods. The first six digits of an HS number are harmonized among the majority of the world's countries. The last four digits are unique to each country. The vast majority of the product-specific rules of origin under the CAFTA-DR use an HS classification number.

The first step in interpreting the rules is to obtain the appropriate code for the good in question. Refer to my previous article on the Harmonized Schedule for help in classifying your products.

A rule of origin may consist of:

  1. A change in tariff classification (also called a tariff shift);
  2. A regional value-content requirement;
  3. Both a change in tariff classification and a regional value content requirement.

It is necessary to refer to the rule associated with the product being exported. Regional value content can only be applied when it is allowed under a product-specific rule. You can view the product specific rules of origin (Annex 4.1) online.

CAFTA-DR_Certificate_of_OriginRegional Value Content

The Regional Value Content test allows the good to qualify using either one of two methods. These are the build-down and build-up methods.

Build-Down Method

Regional Value Content (RVC) = ((Adjusted Value — Value of Non-Originating Materials)/Adjusted Value) x 100

Build-Up Method

Regional Value Content (RVC) = (Value of Originating Materials/Adjusted Value) x 100

For non-originating materials used in the production of a good, the following expenses may be deducted from the value of that material in accordance with Article 4.4:

  1. The costs of freight, insurance, packing and all other costs incurred in transporting the material within a party’s territory or between territories of two or more parties to the location of the producer.
  2. The cost of waste and spoilage resulting from the use of the material in the production of the good, less the value of renewable scrap or by-product.
  3. Duties, taxes and customs brokerage fees on the material paid in the territory of one or more of the parties other than duties and taxes that are waived, refunded, refundable or otherwise recoverable, including credit against duty or tax paid or payable.
  4. The cost of originating materials used in the production of the non-originating material in the territory of a party.

Note: The percentage of RVC content may vary from 25% to 65%, so it is important that you review the specific requirements stated in Annex 4.1.

Other Factors

A thorough reading of Chapter 4 of the CAFTA-DR is necessary to determine the origin of a product, and thus, whether it is eligible for preferential duty treatment. However, below are some of the factors, beyond the product-specific rules of origin, which may be considered in making a determination of origin.

De Minimis Rule

All non-originating materials used in the production of the finished good that do not undergo a change in tariff classification are considered originating if the value of all those non-originating materials does not exceed 10% of the adjusted value of the good, i.e., the de minimis amount. This is provided that the good meets all other applicable qualification criteria set forth in Chapter 4.

The de minimis rule does not apply when using the build-down method described above to calculate the RVC. The value of all non-originating materials used in the production of a good must be included in the calculation.

For textiles and apparel, refer to Article 3.25.7 and Annex 4.1 of the CAFTA-DR for the relevant de minimis rule.

There are some cases where the de minimis rule does not apply. To review these exceptions, go to Annex 4.6 of the CAFTA-DR. For textiles and apparel refer to Article 3.25.7.

Accumulation

Originating goods or materials from one or more countries that are party to the CAFTA-DR that are incorporated into a good in the territory of another party to the Agreement are considered originating materials of the party where the incorporation takes place.

A good is originating when the good is produced in the territory of one or more of the countries participating in CAFTA provided that the good qualifies under the rules, as discussed above, of the CAFTA-DR.

Fungible Goods and Materials

Fungible goods or materials refers to goods or materials that are interchangeable for commercial purposes and whose properties are essentially identical. The CAFTA-DR allows importers to claim a fungible good or material as originating where the importer, exporter or producer has either physically segregated each fungible good or material or used any inventory management system that is recognized in the Generally Accepted Accounting Principles or is otherwise accepted by the party where the production is performed.

Examples of inventory methods include: averaging, last-in first-out (LIFO), or first-in first-out (FIFO). Please note that physical separation of the goods is not necessary but may be used for each fungible good or material.

Indirect Materials

Indirect materials are considered to be originating materials regardless of where they are produced. An indirect material is defined as a good used in the production, testing or inspection of a good but not physically incorporated into the good, or a good used in the maintenance of buildings or the operation of equipment associated with the production of a good, including:

  1. Fuel and energy
  2. Tools, dies and molds
  3. Spare parts and materials used in the maintenance of equipment and buildings
  4. Lubricants, greases, compounding materials and other materials used in production or used to operate equipment and buildings
  5. Gloves, glasses, footwear, clothing, safety equipment and supplies
  6. Equipment, devices and supplies used for testing or inspecting the good
  7. Catalysts and solvents
  8. Any other goods that are not incorporated into the good but whose use in the production of the good can reasonably be demonstrated to be a part of that production

You'll find more detailed information about the CAFTA-DR (as well as other U.S. free trade agreements) at the export.gov website.


This post was originally published in September 2006 and has been updated to include current information, links and formatting.

Like what you read? Subscribe today to the International Trade Blog to get the latest news and tips for exporters and importers delivered to your inbox.

Sue Senger

About the Author: Sue Senger

Sue Senger is retired after a long career as an international trade consultant and faculty member at St. Paul College in St. Paul, Minnesota. She taught classes in Business Management, Supply Chain Logistics, Entrepreneurship/Marketing and Global Trade.

Are you sure you’re using the right documents for your exports?

When you know how to properly prepare your export paperwork, your goods will ship on time, you’ll get paid more quickly, and you’ll stay compliant with export and import regulations. Find out how by downloading this free guide.

Get Your Copy

ebooks
email

Subscribe to the Newsletter!

Join the 33,143 other exporters and importers who get the latest news, tips and insights from international trade professionals.